I TRAVERTINI

I TRAVERTINI

0.00

Discrete and never flaunted elegance, I Travertini proposes a prestigious style and clean lines.

Certain materials have always embodied an innate and timeless elegance. The compositional rigor and the sublime aesthetic value of the graphics bring into the project the beauty of nature, the uncontested queen of the Travertini range. The self-celebration of an involving luxury follows, bright and at the same time extremely modern and recognizable.

Add To Cart
 
COLORS
 
DECORS

Decoro Magnum

Modulo Muretto Sfalsato Magnum

Mosaico

Mosaico 3D

Mosaico Magnum

DIMENSIONS & FINISHES
Color Size Availability Thickness Finish
BEIGE 16 X 32, 32 X 32, 24 X 48 10mm MATTE
16 X 32, 32 X 32, 24 X 48 10mm GLOSSY
16 X 32 10mm Slate Hammered
WHITE 16 X 32, 32 X 32, 24 X 48 10mm MATTE
16 X 32, 32 X 32, 24 X 48 10mm GLOSSY
16 X 32 10mm Slate Hammered
64 X 126, 32 X 95, 32 X 32 6mm MATTE
64 X 126, 32 X 95, 32 X 32 6mm GLOSSY
Grey 16 X 32, 32 X 32, 24 X 48 10mm MATTE
16 X 32, 32 X 32, 24 X 48 10mm GLOSSY
16 X 32 10mm Slate Hammered
BLACK 16 X 32, 32 X 32, 24 X 48 10mm MATTE
16 X 32, 32 X 32, 24 X 48 10mm GLOSSY
16 X 32 10mm Slate Hammered
64 X 126, 32 X 95, 32 X 32 6 MM MATTE
64 X 126, 32 X 95, 32 X 32 6 MM GLOSSY
TECHNICAL INFO

10mm (COLOURED BODY PORCELAIN STONEWARE)

Reference standard Test method Reference value Declared value
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions ISO-10545-2 ±0.6% (±2 mm) ±0.15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions ISO-10545-2 ±5% (±0.5 mm) ±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions ISO-10545-2 ±0.5% (±1.5 mm) ±0.1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions ISO-10545-2 ±0.5% (±2 mm) ±0.2%
Flatness (centre curvature / edge curvature / warpage) ISO-10545-2 ±0.5% (±2mm) ±0.35%
Surface quality ISO-10545-2 Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Amount of water absorbed, in percentage ISO-10545-3 E<0.5% average value 0.08%
Breaking strength in N (thickness >= 7.5 mm) ISO-10545-4 ≥1300 Newton average value 3200 N
Bending strength in N/mm2 ISO-10545-4 >35 N/mm2 average value 50 N/mm2
Resistance to abrasion of glazed tiles ISO-10545-7 Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante Cl. 3 (Black); Cl. 4
Resistance to staining ISO-10545-14 classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo Cl. 4
Resistance to low concentrations of acids and alkali ISO-10545-13 Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante GLB
Resistance to domestic chemicals and additives for swimming pools ISO-10545-13 GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo GA
Resistance to low concentrations of acids and alkali ISO-10545-13 Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante GLA strutturata
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012 DCOF >0.42 wet >0.42 wet strutturata
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012) DCOF >0.42 wet >0.42 wet matte
Frost resistance ISO-10545-12 Richiesta / Required / Requise / Gefordert / Requerida RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Barefoot slip resistance DIN-51097 - Cl. A+B+C strutturata
Slip resistance with shoes DIN-51130:2010 - R11 strutturata

6mm (COLOURED BODY PORCELAIN STONEWARE)

Reference standard Test method Reference value Declared value
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions ISO-10545-2 ±0.6% (±2 mm) ±0.15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions ISO-10545-2 ±5% (±0.5 mm) ±5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions ISO-10545-2 ±0.5% (±1.5 mm) ±0.1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions ISO-10545-2 ±0.5% (±2 mm) ±0.2%
Surface quality ISO-10545-2 Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Flatness (centre curvature / edge curvature / warpage) ISO-10545-2 ±0.5% (±2mm) ±0.2%
Amount of water absorbed, in percentage ISO-10545-3 E less than 0.5% average value 0.08%
Breaking strength in N (thickness less than 7.5 mm) ISO-10545-4 ≥700 Newton less than 0.5% average value 1350 N *
Bending strength in N/mm2 ISO-10545-4 >35 N/mm2 less than 0.5% average value 52 N/mm2
Resistance to abrasion of glazed tiles ISO-10545-7 Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante less than 0,5% Cl. 3 (Black); Cl. 4
Resistance to staining ISO-10545-14 classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo Cl. 3-4
Resistance to low concentrations of acids and alkali ISO-10545-13 Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante GLB
Resistance to domestic chemicals and additives for swimming pools ISO-10545-13 GB minimo / GB minimum / GB minimum / GB mindestens / GB minimo GA
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012) DCOF >0.42 wet > 0.42 wet matte
Frost resistance ISO-10545-12 >Richiesta / Required / Requise / Gefordert / Requerida RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Determinazione della cessione di piombo e cadmio ISO-10545-15 >- ASSENTE / ABSENT / ABSENT/ ABWESEND / AUSENTE / несуществующее