VISIONS

VISIONS

0.00

The warm richness of wood combines with the cold simplicity of cement in a perfect match. Elegant. The vision of a complete project represents an uninterrupted dialog between memory and design. The color ranges over two materials with innovatively designed shapes. The result is pure harmony between surfaces - emotion.

Add To Cart
 
COLORS
 
DECORS

Modulo Listello Sfalsato

Modulo Muretto

Modulo Muretto Sfalsato

Modulo Trapezio

Mosaico

Mosaico Esagone

DIMENSIONS & FINISHES
Color Size Availability Thickness Finish
WHITE CONCRETE 24 X 48, 32 X 32, 16 X 32 32 X 32 HEX 10mm SOFT
16 X 32 10mm GRIP
SILVER CONCRETE 24 X 48, 32 X 32, 16 X 32 32 X 32 HEX 10mm SOFT
16 X 32 10mm GRIP
WHITE WOOD 6 X 48, 8 X 48 4 X 24 TRAPEZOID RIGHT 4 X 24 TRAPEZOID LEFT 10mm MATTE
8 X 48 10mm GRIP
GRAY WOOD 6 X 48, 8 X 48 4 X 24 TRAPEZOID RIGHT 4 X 24 TRAPEZOID LEFT 10mm MATTE
8 X 48 10mm GRIP
BEIGE WOOD 6 X 48, 8 X 48 4 X 24 TRAPEZOID RIGHT 4 X 24 TRAPEZOID LEFT 10mm MATTE
8 X 48 10mm GRIP
BROWN WOOD 6 X 48, 8 X 48 4 X 24 TRAPEZOID RIGHT 4 X 24 TRAPEZOID LEFT 10mm MATTE
8 X 48 10mm GRIP
TECHNICAL INFO

10mm (Fine Porcelain Stoneware)

Reference standard Test method Reference value Declared value
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions ISO-10545-2 ±0.6% (±2 mm) ± 0.15%
Admitted deviation, in %, of the average thickness of each tile from the production dimensions ISO-10545-2 ±5% (±0.5 mm) ± 5%
Maximum straightness deviation, in %, in relation to the corresponding production dimensions ISO-10545-2 ±0.5% (±1.5 mm) ± 0.1%
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions ISO-10545-2 ±0.5% (±2 mm) ± 0.2%
Flatness (centre curvature / edge curvature / warpage) ISO-10545-2 ±0.5% (±2mm) ± 0.35%
Surface quality ISO-10545-2 Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visibles CONFORME / CONFORMING / CONFORME / KONFORM / CONFORME / СООТВЕТСТВУЕТ
Breaking strength in N (thickness >= 7.5 mm) ISO-10545-4 4 ≥1300 Newton average value 3200 N
Bending strength in N/mm2 ISO-10545-4 >35 N/mm2 average value 50 N/mm2
Resistance to deep abrasion of unglazed tiles ISO-10545-6 <175 mm3 average value 140
Thermal shock resistance ISO-10545-9 - RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Resistance to staining ISO-10545-14 - 3-4
Resistance to low concentrations of acids and alkali ISO-10545-13 Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante ULA
Resistance to high concentrations of acids and alkali ISO-10545-13 Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricante UHA
Resistance to domestic chemicals and additives for swimming pools ISO-10545-13 UB minimo / UB minimum / UB minimum / UB mindestens / UB minimo UA
Frost resistance ISO-10545-12 Richiesta / Required / Requise / Gefordert / Requerida RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE / УСТОЙЧИВ
Slip resistance with shoes DIN-51130:2010 - R10 (Wood)
Slip resistance with shoes DIN-51130:2010 - Cl. B grip
Slip resistance with shoes DIN-51130:2010 - R9 soft
Slip resistance with shoes DIN-51130:2010 - R11 grip
Barefoot slip resistance DIN-51097 - Cl. A (Wood)
Static coefficient of friction ASTM-C1028 >0.60 dry and wet > 0.6 dry and wet (wood)
Static coefficient of friction ASTM-C1028 >0.60 dry and wet > 0.60 dry and wet soft
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012) DCOF >0.42 wet > 0.42 wet
Amount of water absorbed, in percentage ISO-10545-3 E<0.5% average value 0.08%